Datex Ohmeda Avance Cs2 User Manual
- Datex Ohmeda Avance Cs2 User Manual Pdf
- Datex Ohmeda Avance Cs2 User Manual User
- Datex Ohmeda Avance Cs2 User Manual Download
- Datex Ohmeda Avance Cs2 User Manual Instructions
The Avance CS2 anesthesia machine offers GE’s unique approach to perioperative solutions – close and continuous collaboration with clinicians. Clinicians will benefit from the compact, integrated design that features advanced anesthesia delivery and the very best in anesthesia patient monitoring. Preoperative Checkout. Refer to the User’s Reference manual for step-by-step instructions. Every day before your first patient Check that necessary emergency equipment is available and in good condition. Check that the pipeline gas supplies are connected. If equipped with cylinders.
Page 1
GE Healthcare
Avance CS2
Preoperative Checkout
Refer to the User’s Reference manual for step-by-step instructions.
Every day before your first patient
Requests for servicing facilities, advice or assistance must be addressed either to a local Datex-Ohmeda Office or to an Datex-Ohmeda Authorized Distributor. Additional copies of this manual, quoting Datex-Ohmeda D-Tec Vaporizer O & M Manual Part No. 1107-0622-000, can be requested from a local Datex-Ohmeda Field Operations Unit or from an. GE Avance CS2 Features. The Avance CS2 is based on the proven platform components of the Avance Carestation, incorporating our 100 years of anesthesia system experience. The Avance CS2 comes with ecoFLOW is a fully integrated Carestation that combines anesthesia delivery, patient monitoring, and data management into one innovative system. Datex-Ohmeda terms their fail safe a 'pressure sensor shut off valve'- at 20 psi oxygen, the flow of all other gases are shut off. Also, Ohmeda uses a second-stage O2 pressure regulator (ensures constant oxygen flowmeter input until supply pressure is less than 12-16 psi). Page 2 Datex-Ohmeda and by Datex-Ohmeda trained personnel. The Product must not be altered without the prior written approval of Datex-Ohmeda. The user of this Product shall have the sole responsibility for any malfunction which results from improper use, faulty maintenance, improper repair, damage, or alteration by anyone other than Datex-Ohmeda. GE Datex-Ohmeda. compact CO 2 sidestream respiratory monitoring with a new generation of infrared technology 2; Specifications: When caring for critically-ill patients, speed is of the essence. The B20 patient monitor makes it easy to acquire accurate patient data to support timely decision-making.
Check that necessary emergency equipment is available and in good condition.
Check that the pipeline gas supplies are connected. If equipped with cylinders,
check that there is sufficient reserve capacity and that the cylinder valve is closed.
Connect scavenging and verify operation.
Check that the breathing circuit is correctly connected, not damaged, and the
breathing system contains sufficient absorbent in the canister.
Turn the System switch On.
Turn the system circuit breaker off and check that mechanical ventilation
continues while the system is running on battery power. After completing the
check, turn the system circuit breaker on. The mains indicator is lit when AC
power is connected.
Set the appropriate controls and alarm limits for the case.
Check that the equipment is not damaged and that components are correctly
attached.
Check vaporizer installation:
• Make sure that the top of each vaporizer is horizontal (not on crooked).
• Make sure each vaporizer is locked and cannot be removed.
• Make sure the alarms and indicators operate correctly (Tec 6 Plus vaporizer).
• Make sure that more than one vaporizer cannot be turned on at the same
time.
• Make sure that the vaporizers are adequately filled.
Perform a Full Test from the Checkout menu. /download-latest-virtual-dj-effects.html.
Check that an adequate reserve O2 supply is available.
Check that the ventilator functions correctly:
• Connect a test lung to the patient breathing circuit connection.
• Set the ventilator to VCV mode and the settings to TV to 400 ml, RR to 12, I:E
to 1:2, Tpause to Off, and Pmax to 40 cmH2O.
• Set the gas flow to the minimum settings.
• Start a case.
• Set the Bag/Vent switch to Vent.
• Fill the bellows using O2 flush.
• Check that mechanical ventilation starts. Check that the bellows inflate and
deflate. Check that the display shows the correct ventilator data. Check that
there are no inappropriate alarms.
Page 1
GE Healthcare
Avance CS2
Preoperative Checkout
Refer to the User’s Reference manual for step-by-step instructions.
Every day before your first patient
Check that necessary emergency equipment is available and in good condition.
Check that the pipeline gas supplies are connected. If equipped with cylinders,
check that there is sufficient reserve capacity and that the cylinder valve is closed.
Connect scavenging and verify operation.
Check that the breathing circuit is correctly connected, not damaged, and the
breathing system contains sufficient absorbent in the canister.
Turn the System switch On.
Turn the system circuit breaker off and check that mechanical ventilation
continues while the system is running on battery power. After completing the
check, turn the system circuit breaker on. The mains indicator is lit when AC
power is connected.
Set the appropriate controls and alarm limits for the case.
Check that the equipment is not damaged and that components are correctly
attached.
Check vaporizer installation:
• Make sure that the top of each vaporizer is horizontal (not on crooked).
• Make sure each vaporizer is locked and cannot be removed.
Datex Ohmeda Avance Cs2 User Manual Pdf
• Make sure the alarms and indicators operate correctly (Tec 6 Plus vaporizer).
• Make sure that more than one vaporizer cannot be turned on at the same
time.
• Make sure that the vaporizers are adequately filled.
Perform a Full Test from the Checkout menu.
Check that an adequate reserve O2 supply is available.
Datex Ohmeda Avance Cs2 User Manual User
Check that the ventilator functions correctly:
• Connect a test lung to the patient breathing circuit connection.
• Set the ventilator to VCV mode and the settings to TV to 400 ml, RR to 12, I:E
to 1:2, Tpause to Off, and Pmax to 40 cmH2O.
• Set the gas flow to the minimum settings.
• Start a case.
• Set the Bag/Vent switch to Vent.
• Fill the bellows using O2 flush.
• Check that mechanical ventilation starts. Check that the bellows inflate and
Datex Ohmeda Avance Cs2 User Manual Download
deflate. Check that the display shows the correct ventilator data. Check that
Datex Ohmeda Avance Cs2 User Manual Instructions
there are no inappropriate alarms.